PERSONAL ELECTRONIC ALARMING DOSIMETER

RAD-60 Personal Dosimeter is a ionizing radiation detection instrument in order to ensure the personal safety of the user. It is suitable for a broad range of everyday radiation monitoring purposes in stand alone conditions.

Technical specification
Radiation detected: gamma measured in Hp(10)
Detector: Si-diode
Measurement range:
– dose 1 µSv – 10 Sv
– dose rate: 5 µSv/h – 3 Sv/h
Calibration: better than ±5% (662 keV @ 2 mSv/h), Hp(10)
Energy response: Hp(10), 60 keV – 3 MeV, better than ±25%, up to 6 MeV, better than ±35%
Dose rate linearity: better than ±15%, up to 3 Sv/h
Audible alarms:
– eight separate alarms, sound level typically better than 85 dB(A) @ 30 cm
– integrated dose
– dose rate
– dose overflow
– dose rate over flow at 3 Sv/h
– low battery 1 and 2
– defect
Alarm thresholds: 7 preset values each for integrated dose and dose rate, manually selectable by push-button
Push-button functions:
– front panel push-button has the following selectable functions:
– toggle between dose and dose rate display
– switch ON/OFF
– chirp ON/OFF
– reset integrated dose
– change alarm thresholds
– activate battery test
Note that the active alarm tresholds and configuration of push button functions can be changed by using ADR-1 Reader Head in combination with PC Software
Dimensions: 78 x 67 x 22 mm
Weight: 80 g including battery
Temperature range:-20° to +50° operational, humidity up to 90% RH, non condensed
Power supply:one standard AAA alkaline battery, life typically 1800 h in background field
Reader communication: infrared through bottom part; by using ADR-1 Reader Head in combination with PC software